[asterisk-users] Adit 600 password reset

[C F]

Looks promising will try it and let you know.

Thank you

On Thu, May 29, 2008 at 9:22 AM, Jerry Jones <jjones at danrj.com> wrote:
> Just noticed end of thread here. Not sure if it was mentioned but the
> newer - less than a few years - have a backdoor that works. Have not
> been able to get it to work on older units though. Here are my notes
> from the last time I tried - no warranties from me;)
>
> Obviously via a serial connection.
>
> PowerON
>
> Restoring "Factory" Defaults
>
> Stop the boot
> press 1 and enter
> type e db and enter
>
> BOOT [?,c,p,t,x,y,z]: 1
> BOOT debug ON
> BOOT [?,c,p,v,t,x,y,z,@]: e db
>  Preserving Mac= 0:e0:92:0:83:8
>  Flash Man=Atmel(1f) Dev-AT29LV010A(35) 8K Locks: Lo=NO(fe) Hi=NO(fe)
>  Erasing App DB…
>  Erase Done!
> BOOT [?,c,p,v,t,x,y,z,@]: 0
> BOOT debug OFF
> BOOT [?,c,p,t,x,y,z]: x
>
> Looking for valid application image in Flash…
>
> One Moment >>> Decompressing Image…
> Attached TCP/IP interface to cpm unit 0
> Attaching interface lo0…done
> System startup
> ERROR: Unable to recover db from flash.
>        Creating new flash image.
> CRC Error in OEM Data
>
> [……………………]
>
> Startup complete
>
> On May 23, 2008, at 10:26 AM, C F wrote:
>
>> yes that's how I figured out the username. since it returned incorrect
>> login before the password prompt on the wrong username.
>> I a don't know the password however.
>>
>>
>> On 5/23/08, Shane Young <asterisk3 at shaneyoung.com> wrote:
>>> Quoting Doug Lytle <support at drdos.info>:
>>>
>>>> C F wrote:
>>>>>>
>>>>>
>>>>> Then there is basicly no way to do this besides for cracking it? I
>>>>>
>>>>
>>>> Not that I am aware of, no.  This subject went around several years
>>>> back.  They also talk about brute forcing the password as well.
>>>> As far
>>>> as I recall, nobody came back saying they were successful.
>>>>
>>>>> have already figured out the username, now I just need to figure
>>>>> out
>>>>> the password. What is a good screen automation program that can
>>>>> bruteforce this for Windows?
>>>
>>> I had the same problem with one of mine.  I smply forgot the
>>> password.
>>>
>>> I seem to recall that the adit had a flaw in it, where it was obvious
>>> by the error message returned if you had the correct length username
>>> and password, which should make your brute-force attempt much easier.
>>>
>>> --Shane
>>>
>>> ----------------------------------------------------------------
>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>