[asterisk-users] Card loading order...

[Tzafrir Cohen]

On Tue, May 27, 2008 at 11:18:00AM -0500, Shaun Ruffell wrote:
> Matt Watson wrote:
> > On May 26, 2008 05:23:10 pm Carlos Chavez wrote:
> >>      I am having a problem with a couple servers.  They both have a Digium
> >> TE110P and a TDM04B card.  I have setup the system so the TE110P uses
> >> channels 1-31 and the TDM04B 32-35.  The problem is that when we reboot the
> >> server sometimes the TDM04B is recognized first and the TE110P second so
> >> the configuration fails.
> >>
> > 
> > Probably you have the modules listed somewhere else that they are getting 
> > loaded from.  However, I couldn;t really point you in the direction of where 
> > to look without knowing what Linux distro you are using.
> 
> From my experience, it's typically udev that loads the drivers before 
> the zaptel init script does.  What you will want to do is make sure that 
> the wcte12xp and wctdm modules are added to udevs blacklist (on Fedora8 
> /etc/modprobe.d/blacklist...). 

But then the zaptel init.d script won't load them either, right?

Isn't there a way to modprobe for some drivers before udev?

(there is on Debian and Gentoo).

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir