[asterisk-users] forwarding pots lines

[Joe Carroll]

Two grandsreams, a 4008 and a 4108 would inexpensively do this for you.  Instructions are on their site.

-----Original Message-----
From: "Alex Balashov" <abalashov at evaristesys.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: 5/23/08 1:21 AM
Subject: Re: [asterisk-users] forwarding pots lines


Eric Fort wrote:

> I'm looking for a simple hardware solution where I can connect POTS
> lines at one place and make them appear transparently at another
> location with only SIP and the internet between the locations.  If I'm
> thinking this out right one location would need a box with a bunch of
> fxo interfaces and the other would need a box with a equal number of fxs
> interfaces.  I'd like this to essentially emulate a really long piece of
> phone wire in as many ways as possible.  What hardware should I use and
> what is the best way to provision this.  I'd prefer to forgo the expense
> of 2 full asterisk servers as this seems unnecessary for the application.

You can use devices called ATAs (Analogue Telephone Adaptors).  They are
much cheaper.

--
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users