[asterisk-users] Handling multiple fax machines and the fax extension, and general call routing

[Steve Totaro]

On Thu, May 22, 2008 at 4:07 PM, Steve Totaro
<stotaro at totarotechnologies.com> wrote:
> On Thu, May 22, 2008 at 3:59 PM, arkda <thrills3k3r at gmail.com> wrote:
>> Hi,
>>
>> I've been trying to implement a fax solution using a TDM880 (8 analog ports,
>> FXS). I have a PRI circuit that terminates on a TE120 at the same server.
>> The server is running Asterisk 1.4.18.
>>
>> The idea is to have seven fax machines, each with a different number,
>> connected directly to the TDM880. Zaptel/Zapata are configured and work
>> properly (1-24 is the TE120, 25-32 is the TDM880). Voice calls are working
>> great, and a single fax machine works well.
>>
>> I seem to be having some difficulty with my dialplan when using the fax
>> extension, however. Here is an abbreviated example of my dialplan:
>>
>> extensions.conf
>>
>> [internal]
>> exten => 2001,1,Dial(SIP/2001)
>> exten => 2002,1,Dial(SIP/2002)
>>
>> ; dial out
>> exten => _1NXXNXXXXXX,1,Dial(Zap/G2/${EXTEN})
>>
>> exten => fax,1,Goto(${EXTEN})
>>
>> ; fax machines
>> exten => 1000,1,Answer()
>> exten => 1000,n,Wait(3)
>> exten => 1000,n,Dial(Zap/25)
>>
>> exten => 1001,1,Answer()
>> exten => 1001,n,Wait(3)
>> exten => 1001,n,Dial(Zap/26)
>>
>> exten => 1002,1,Answer()
>> exten => 1002,n,Wait(3)
>> exten => 1002,n,Dial(Zap/27)
>>
>> [external]
>>
>> exten => 2001,1,Goto(internal,2001,1)
>> exten => 2002,2,Goto(internal,2002,1)
>>
>> exten => fax,1,Goto(internal,${EXTEN},1)
>>
>> exten => 1000,1,Answer()
>> exten => 1000,n,Wait(3)
>> exten => 1000,n,Goto(internal,1000,1)
>>
>> exten => 1001,1,Answer()
>> exten => 1001,n,Wait(3)
>> exten => 1001,n,Goto(internal,1001,1)
>>
>> exten => 1002,1,Answer()
>> exten => 1002,n,Wait(3)
>> exten => 1002,n,Goto(internal,1002,1)
>>
>> -----------------------------------
>>
>> My PRI provider only hands off the last 4 digits, so the above works well
>> for voice calls. The fax detection extensions DO detect faxes properly
>> (faxdetect=both is set in zapata.conf), however I'm not sure how to route
>> them to the proper line (Zap/25, etc.) if I route the calls into a catch all
>> extension such as 's'. The above doesn't work since the $[EXTEN} variable
>> gets changed from the dialed number, such as '1001', to 'fax' and dives into
>> a loop. By changing the fax extension lines to something like this:
>>
>> exten => fax,1,Dial(Zap/25)
>>
>> I can get a single line to dial and receive without any problems, but this
>> obviously will not work for multiple fax machines.
>>
>> What's the best method for properly routing numbers that get routed into a
>> catch all extension, such as 's'? I've been digging around in the Asterisk:
>> TFOT v2 and on Google, but I haven't been able to find an example of this.
>>
>>
> exten => fax,1,Dial(Zap/25,5)
> exten => fax,n,Dial(Zap/26,5)
> exten => fax,n,Dial(Zap/27,5)
>
> Timeout on 5 seconds roll to the next line.
>
> Thanks,
> Steve Totaro
>

If you want to use DIDs then add exten =
NNNN,1,Dial(correspondingDAHDIchan) the NNNN is going to correspond
with the last four digits of your DID, what the telco is sending....

Thanks,
Steve Totaro