[asterisk-users] More fun but with Wireshark capture

Doug Lytle support at drdos.info
Thu May 22 11:41:15 CDT 2008


Alexander Lopez wrote:
> Is it possible that the phones loaded a new Firmware or that the
> configuration file has changed?
>
>   
No, they are the older IP300 and IP500s.  They're currently running 
2.1.2.0078.  I was going to move them up to the 2.2.0, but the firmware 
won't work on these older phones.

No configurations have changed.  I have been told that in the last two 
weeks, they've had power issues.  Burning up several circuit boards in 
the press room.

> It is really strange that you have done all that you have done and the
> problem persists.
>
> IIRC you have:
>
> Swapped switches
>   
I power cycled the switches and the router.

> Swapped NICs
> Swapped Servers
>
> The only common elements left are:
> Cabling (can go bad but ALL at once), you may try swapping out the cable
> to the CPU, Heck you done everything else!!!
>   

I'll give this a try right now.

> Phones, Can you load a soft phone into a laptop of PC and see if the
> problem persists??
>
>   
I'll give that a try as well


> You mentioned that this all became with a DHCP failure, what about the
> DNS settings, is it possible that the phone is waiting on a reverse
> lookup on the IP address and once it times out it responds to all at
> once??
>   

It's always possible.  I'll consult with the network admin.

Thanks for your input!





More information about the asterisk-users mailing list