[asterisk-users] AsteriskNow: No Analog Hardware Detected

Scott Sharkey ssharkey at linuxunlimited.com
Tue May 20 12:37:33 CDT 2008


Tzafrir Cohen wrote:
> On Tue, May 20, 2008 at 09:03:16AM -0400, Scott Sharkey wrote:
>> Hello All,
>>
>> I have an older TDM400P (~5-6 years, bought as a developer kit). 
>> Previous versions of Trixbox worked fine with it, but I recently tried 
>> moving to Asterisk Now, and I am not getting the card recognized. 
>> Asterisk Now (And Trixbox) do not see the card, and insist on 
>> configuring the ZTDUMMY interface.
>>
>> I'm not sure how to debug this.  It's an older card, and I've not
>> updated bios or anything like that (not sure if that's necessary).
>>
>> Some selected info below:
> 
> That information is from the trixbox system, right?

Yes, though the lspci was the same for the asterisk now, and the
lsmod was very similar.  I will have to reload asterisk now tonite
when I get home to verify, but will do that and repost.

> Can you provide the same information from the AstriskNow system?

AFter I get home tonite.

> Also: what is the output of: 'zaptel_hardware' ?

No output at all, even with -v

-Scott

> 
>> LSPCI sees:
>>
>> 01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN 
>> interface
>>
>> lsmod shows:
>>
>> Module                  Size  Used by
>> ipv6                  251393  20
>> autofs4                24517  2
>> sunrpc                144253  1
>> ztdummy                 9256  0
>> opvxa1200              36800  0
>> xpp_usb                20676  0
>> xpp                   127040  1 xpp_usb
>> wcusb                  18176  0
>> wctdm                  38720  0
>> wcfxo                  15904  0
>> wctdm24xxp            110304  0
>> wcte11xp               28320  0
>> wct1xxp                17440  0
>> wcte12xp               63200  0
>> wct4xxp               298880  0
>> tor2                   92064  0
>> zaptel                184324  14 
>> ztdummy,opvxa1200,xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2
>> oslec                  13848  1 zaptel
>> crc_ccitt               6337  1 zaptel
>> dm_mirror              28869  0
>> dm_multipath           21577  0
>> dm_mod                 58457  2 dm_mirror,dm_multipath
>> parport_pc             29157  1
>> lp                     15849  0
>> parport                37513  2 parport_pc,lp
>> snd_intel8x0           35421  0
>> snd_ac97_codec         93025  1 snd_intel8x0
>> ac97_bus                6337  1 snd_ac97_codec
>> snd_seq_dummy           7877  0
>> snd_seq_oss            32577  0
>> snd_seq_midi_event     11073  1 snd_seq_oss
>> snd_seq                49713  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>> snd_seq_device         11725  3 snd_seq_dummy,snd_seq_oss,snd_seq
>> snd_pcm_oss            42945  0
>> ide_cd                 40033  0
>> snd_mixer_oss          19009  1 snd_pcm_oss
>> forcedeth              47561  0
>> floppy                 57125  0
>> k8_edac                18177  0
>> snd_pcm                72133  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>> edac_mc                24977  1 k8_edac
>> i2c_nforce2            10945  0
>> snd_timer              24645  2 snd_seq,snd_pcm
>> k8temp                  9537  0
>> cdrom                  36705  1 ide_cd
>> i2c_core               23745  1 i2c_nforce2
>> serio_raw              10693  0
>> snd                    52421  9 
>> snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>> hwmon                   7365  1 k8temp
>> pcspkr                  7105  0
>> soundcore              11552  1 snd
>> snd_page_alloc         14281  2 snd_intel8x0,snd_pcm
>> sata_nv                22469  0
>> libata                115833  1 sata_nv
>> sd_mod                 24897  0
>> scsi_mod              132685  2 libata,sd_mod
>> ext3                  123337  2
>> jbd                    56553  1 ext3
>> ehci_hcd               32973  0
>> ohci_hcd               23261  0
>> uhci_hcd               25421  0
>>
>> And ztscan says:
>>
>> [1]
>> active=yes
>> alarms=UNCONFIGURED
>> description=ZTDUMMY/1 (source: RTC) 1
>> name=ZTDUMMY/1
>> manufacturer=
>> devicetype=Zaptel Dummy Timing Driver
>> location=
>> basechan=1
>> totchans=0
>> irq=0
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list