[asterisk-users] Basic modules of Asterisk

[Sanjay Rajdev]

Thank Russell, I will try to manage it through the modules.conf file. 

Regards, 
Sanjay Rajdev 

----- Original Message ----- 
From: "Russell Bryant" <russell at digium.com> 
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> 
Sent: Thursday, May 8, 2008 4:11:00 AM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi 
Subject: Re: [asterisk-users] Basic modules of Asterisk 

Sanjay Rajdev wrote: 
> I just want to Run Asterisk with the basic required modules, What can I do to achieve so? 
> 
> My only requirement is to run SIP clients and the Dictate Module. 

2 options: 

1) Before compiling and installing Asterisk, run "make menuselect" to select 
only the modules that you want to use. That way, only those modules are 
compiled and installed. 

2) After installing Asterisk, edit /etc/asterisk/modules.conf. By default, 
Asterisk will load all installed modules. You can turn off the autoload 
functionality, and explicitly list the modules that you need. You probably want 
pbx_config, chan_sip, app_dictate, app_dial, probably some others ... 

-- 
Russell Bryant 
Senior Software Engineer 
Open Source Team Lead 
Digium, Inc. 

_______________________________________________ 
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- 

asterisk-users mailing list 
To UNSUBSCRIBE or update options visit: 
http://lists.digium.com/mailman/listinfo/asterisk-users 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080508/a2b85ef3/attachment.htm