[asterisk-users] Question about PCI Slots for DIGIUMs Boards

[Al Baker]

No actually I gave it a LOT of thought and I and even asked two 
different techs who repair PCs
and both said "what the to vendors are saying is not sufficiently clear 
that I would
make a purchasing decision based on what you have in hand from them"
But, nice try at the cheap shot.

Steve Totaro wrote:
> On Thu, Mar 27, 2008 at 6:48 AM, Al Baker <bwentdg at pipeline.com> wrote:
>   
>> I had sent this to Digium Sales and cant get a response from them, I
>>  don't. know what that means......
>>  So I thought I would ask it hear since i know others have struggled with
>>  this.
>>
>>  "I an considering using *your High Density T*1 cards on a number of
>>  servers we are considering purchasing. The vendor lists that his system has:
>>
>>         PCI Express*: two x8 slots*, t*wo x8 low profile slots*; *PCI-X:
>>  64-bit/100MHz*
>>
>>  Could you please clarify *WHICH* of the above listed *PCI slots* are
>>  suitable for use with your *High Density T1 cards*. If there is *more
>>  than one combination that is possible*, could you please indicate *WHICH
>>  *which high density T1 cards will work in *WHICH* type of PCI slot."
>>
>>  Thanks for any guidance and help since DIGIUM sales seems to be too busy
>>  to advise a potential customer
>>
>>     
>
> You never qualify "High Density".
>
> Maybe Digium thought you might get tired of waiting and find your own
> answer http://en.wikipedia.org/wiki/Peripheral_Component_Interconnect
>
> Besides that, look here http://store.digium.com/products.php?category_id=2
>
> You should be able to figure it out on your own with a little thought.
>
> Thanks,
> Steve Totaro
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>