[asterisk-users] Anyone know of a pass through ATA

[Thermal Wetland]

That is good to know.

I will be using the the device to connect a bunch of analog phones back to a
centralized server.

Since each office has only one ethernet connection do I want to:
1. Install a small switch to let a SPA1001 & PC use the one drop
2. Install a SPA3102 to let the PC share the one drop

Even with an extra patch cord and probably the occasional power strip number
one will be cheaper, but #2 seems like a better way to go.

-Thermal

On Fri, Mar 14, 2008 at 6:41 PM, <billk at iinet.net.au> wrote:

> its not a bad device - I have 2 problems with it.  It doesn't do echo
> cancellation very well & is particularly badly matched to the PSTN here in
> Oz. Hint: keep it well cooled - echo goes up badly when its hot& it runs
> very hot if there is no ventilation.   I use the 3102 to bridge a mythtv box
> instead of putting in an extra switch - works except for the occaisional
> failure to get a dhcp address.  I use a linux gateway for dhcp, most devices
> (3102+mythtv box, lynksys PAP2, bt100 ip phones, wireless and hosts) are all
> dhcp
>
> -----Original Message-----
>
> From:  "Thermal Wetland" <thermalwetland at gmail.com>
> Subj:  Re: [asterisk-users] Anyone know of a pass through ATA
> Date:  Sat 15 Mar 2008 10:23
> Size:  2K
> To:  billk at iinet.net.au, "Asterisk Users Mailing List - Non-Commercial
> Discussion" <asterisk-users at lists.digium.com>
>
> That is awesome. I dont know why the manual doesnt mention that.
>
> I want to have the device use a static IP & the computer use DCHP from a
> central DHCP server...sounds like it wont be a problem.
>
> Thanks.
>
> On Thu, Mar 13, 2008 at 8:14 PM, W.Kenworthy <billk at iinet.net.au> wrote:
>  sipura 3102 set to bridge. Works but I find that when rebooting a PC
>  bridged it sometimes (randomly) doesnt get a dhcp lease, necessitating a
>  powercycle of the 3102. I think the PC drops the ethernet as it reb
>  oots and the sipura doesnt recognise it coming back.
>
>  BillK
>
>
>
>  On Thu, 2008-03-13 at 19:59 -1000, Thermal Wetland wrote:
>  > Anyone know of a company that makes a pass through ATA?
>  >
>  > By pass through I mean have an Ethernet switch built into the ATA,
>  > like most desktop phones have.
>  >
>  > All of the dual ethernet ATAs I have seen have WAN/LAN ports, not two
>  > LAN ports.
>  >
>  > I fooled around with DMZ etc...but it just doesnt work as well.
>  >
>  > Thermal
>
>
> > _______________________________________________
>  > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>  >
>  > asterisk-users mailing list
>  > To UNSUBSCRIBE or update options visit:
>  >  http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080314/2de2ef23/attachment.htm