[asterisk-users] CCM 6 and Asterisk routing again

[Aaron Fransen]

Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1,
Asterisk is running strictly VoIP over the network and using CCM as the
trunk.

Calls from the SIP phones connected to Asterisk work fine. They can call
both external numbers and any Cisco extensions attached to CCM.

Calls from CCM to Asterisk fail without any notification in Asterisk (and I
DID have this working at one point, but I suspect that our Telco may have
pooched the config somehow, since they're in the process of connecting us to
another CCM site).

I have verified: Media Termination point exists, Calling Search Space
exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc),
and a route pattern exists to take calls to the right trunk.

The system will let me complete the dialing sequence to the Asterisk server,
but as soon as I enter the last digit I get a busy signal.

Thoughts anyone?

Here's my sip.conf if that helps...

[callman]
type=peer
context=incoming
insecure=very
host=(ip of my call manager server)
disallow=all
allow=ulaw
allow=alaw
nat=no
canreinvite=yes
qualify=yes

Thanks! Aaron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080311/b35cc0cf/attachment.htm