[asterisk-users] Odd Polycom Reboot Issue

Steve Totaro stotaro at totarotechnologies.com
Fri Jun 13 13:31:36 CDT 2008


On Thu, Jun 12, 2008 at 4:32 PM, Tim Nelson <tnelson at rockbochs.com> wrote:
> Hello list- I'm having an extremely odd issue with an installation of mine. The system is running * 1.2.12.1 and currently handles around 100 handsets. With the exception of a few Grandstream DTA's, all devices are Polycom 320, 430, or 601's. After a recent power outage, I'm having an extremely odd issue with one of the handsets. One of the Polycom 601 units simply reboots every time it gets a call. As soon as the call hits the phone, a small "blip" is heard from the speaker, then the reboot is initiated. There is nothing shown in the asterisk logs to indicate the problem. Likewise, the logs sent by the phone via tftp are equally as useless. We've formatted the phone's filesystem causing it to get a fresh reflash of the firmware from tftp upon bootup. Same problem.
>
> Has anyone experienced an issue such as this? How should I proceed to diagnose and repair the problem? Thank you!!
>
> Tim Nelson
> Systems/Network Support
> Rockbochs Inc.
> (218)727-4332 x105
>
Just getting down to basics but is this PoE or do you have a brick?

Have you tried a different power brick or PoE port?

Thanks,
Steve T



More information about the asterisk-users mailing list