[asterisk-users] Help with E1s

[Steve Totaro]

On Mon, Jun 2, 2008 at 11:46 AM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Mon, Jun 02, 2008 at 10:28:43AM -0500, Tilghman Lesher wrote:
>
>> Generally, only 30 channels of that E1 are usable for voice.  One of the
>> channels is devoted to timing and another one of the channels is generally
>> used for signalling.  The channels are usually signalled thusly:
>>
>> zaptel.conf (upcoming as /etc/dahdi.conf)
>> bchan=1-15,17-31,33-48,50-62
>> dchan=16,47
>>
>> and:
>>
>> zapata.conf (upcoming as /etc/asterisk/chan_dahdi.conf)
>> pri_cpe=1-15,17-31,33-48,50-62
>
> [channels]
>
> ; ...
>
> signalling = pri_cpe
> switchtype = euroisdn
>
> group = 0
>
> channel => 1-15,17-31,33-48,50-62
>
>>
>> The channels are accessible in Asterisk as Zap/1, Zap/2, etc. up to Zap/62.
>> Note that you MUST keep the gaps for the D channels.
>
> or use the group dialing syntax (e.g: Zap/G0)
>
> --
>               Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>

You can do "genzaptelconf" to get a general framework to then edit.

Thanks,
Steve Totaro