[asterisk-users] Newbie in China: Red alaram in Zaptel for E1

[Lee, John (Sydney)]

> If you're interested, our working circuit in Chengdu with a China
> Telecom PRI is configured as:
> 
> /etc/zaptel.conf:
> 
> span=1,0,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
> loadzone = cn
> defaultzone=cn
> 
> /etc/asterisk/zapata.conf (just including the pertinent lines):
> 
> switchtype=euroisdn
> signalling=pri_cpe
> group = 1
> channel=1-15,17-31
>
Thanks Chris.
I have tried exactly the same zaptel.conf before but I got red alarm on
the card and zttool.  I have not configured zapata.conf yet because I
wanted to get zaptel right first.
The installation I am working on is in Shanghai and the line is provided
by NETCOM.