[asterisk-users] How to integerate 2 TDM cards on same machine.

Syed Nasruddin nasruddin at ncel.com.pk
Mon Jul 14 21:45:24 CDT 2008


thanks Noah,
 
zttool shows that TDM800P is loaded first and TDM2401E is loaded second. now problem is ports are not being configured by asterisk. i have done following changes in two files zaptel.onf and zapata.conf.
 
zaptel.conf
loadzone=us, defaultzone=us,
fxoks=1-4, fxsks=5-8, fxsks=9-32(or should this be fxoks???)
 
zapata.conf
signalling=fxoks
............
channels =>1-4
 
signalling=fxsks
............
channels => 5-8
 
signalling=fxsks
............
channels => 9-32

please see the bold lines. since FXO ports use FXS signalling so i used fxsks. is this right or wrong. are these changes have to be made in both the files as i have done or only in zaptel.conf
 
waiting for information
 
thanks
 
syed nasruddin
 

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Noah Miller
Sent: منگل 7/15/2008 12:02 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] How to integerate 2 TDM cards on same machine.



Hi Syed -

> I have been using single TDM800P card. It is a small card with 4FXO and 4FXS
> ports. I have been using it for sometime without any problem. I am using
> Asterisk 1.4.18.1. Now due to greater requirement to handle more calls our
> office has bought another larger card TDM2401E which has 24 FXO ports. I
> have installed it on the same machine. Would like to know following about
> its configuration.
>
> Same Zaptel Driver will be used which is catering for my TDM800P card??
> My zaptel.conf has following current config: loadzone=us, defaultzone=us,
> fxoks=1-4, fxsks=5-8.

Just add in the extra channels: fxoks=9-32.  Be sure to check the
order the cards are loading with zttool.  If the 2401E is loading
first, it will actually be channels 1-24, and the 800 will be channels
25-32.

Also, test to make sure your machine is capable of this setup.  Each
of these cards will generate 1000 interrupts per second.  Most modern
motherboards should be able to handle this, but some older ones may
choke under this load.


- Noah

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/>  --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net <http://www.astricon.net/> 

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 6880 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080715/ef2dfdc5/attachment.bin 


More information about the asterisk-users mailing list