[asterisk-users] Unprovisioned 7961

[Gregory Wong]

Thanks Chad. This config seemed to have worked a bit. I don't get the
"Unprovisioned" or "Error Verifying Config Info" messages anymore. However,
the phone sits at "Registering" and will never register.

I took a look at the sip debug and I see the below messages. Do I need to
enable NAT in the SEP.cnf.xml file since I am behind NAT? I know my 7960
config file has natEnabled = 1.

Scheduling destruction of call
'0018195a-a6770002-4ba9e20e-e89879bd at 192.168.15.100' in 15000 ms

<-- SIP read from <MY HOME IP ADDRESS>:49157:
REGISTER sip:<TB IP ADDRESS> SIP/2.0
Via: SIP/2.0/UDP <MY HOME IP ADDRESS>:1140;branch=z9hG4bK48e89c16
From: <sip:86003@<TB IP ADDRESS>>;tag=0018195aa6770003efaf5095-54a486b0
To: <sip:86003@<TB IP ADDRESS>>
Call-ID: 0018195a-a6770003-b6544a3f-d9fc3a32 at 192.168.15.100
Max-Forwards: 70
Date: Mon, 08 Oct 2007 23:42:08 GMT
CSeq: 101 REGISTER
User-Agent: Cisco-CP7961G/8.3.0
Contact: <sip:86003@<HOME IP
ADDRESS>:1140;transport=udp>;+sip.instance="<urn:uuid:00000000-0000-0000-000
0-0018195aa677>";+u.sip!model.ccm.cisco.com="30018"
Supported: (null),X-cisco-xsi-6.0.2
Content-Length: 0
Reason: SIP;cause=200;text="cisco-alarm:25 Name=SEP0018195AA677
Load=SIP41.8-3-3SR2S Last=initialized"
Expires: 3600


--- (14 headers 0 lines) ---
Using latest REGISTER request as basis request
Sending to <HOME IP ADDRESS> : 1140 (non-NAT)
Transmitting (no NAT) to <HOME IP ADDRESS>:1140:
SIP/2.0 404 Not found
Via: SIP/2.0/UDP <HOME IP
ADDRESS>:1140;branch=z9hG4bK48e89c16;received=<HOME IP ADDRESS>
From: <sip:86003@<TB IP ADDRESS>>;tag=0018195aa6770003efaf5095-54a486b0
To: <sip:86003@<TB IP ADDRESS>>;tag=as1886ecd1
Call-ID: 0018195a-a6770003-b6544a3f-d9fc3a32 at 192.168.15.100
CSeq: 101 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Content-Length: 0


On 1/25/08 10:29 AM, "Chad Osmond" <cosmond at messagelabs.com> wrote:

> Try this configuration file...
> 
> http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configu
> ration+files+for+SIP#Cisco7961with833SR2ConfigurationExamples
> 
> 
> Chad
> ________________________________
> 
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gregory
> Wong
> Sent: Friday, January 25, 2008 6:36 AM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] Unprovisioned 7961
> 
> 
> Hi Everyone,
> 
> I am having some issues getting my 7961 working with Trixbox. I have
> loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes
> into an unprovisioned state. A status message shows up and says "Error
> Verifying Config Info".
> 
> I have read quite a bit on this topic (getting 7961's to work with
> Asterisk and TB) and only came across a few postings where other people
> encountered this issue but no solution was given. I have checked the
> SEP.cnf.xml file for the phone and everything seems to be right. I even
> tried to remove some parts of the code as people suggested but no luck.
> I already have a 7960 on TB so I know that TFTP is working correctly.
> 
> Any ideas on how I can get this to work would be much appreciated.
> 
> Thank. 
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> 
> 
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users