[asterisk-users] Unprovisioned 7961

[Chad Osmond]

Try this configuration file...

http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configu
ration+files+for+SIP#Cisco7961with833SR2ConfigurationExamples


Chad
________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gregory
Wong
Sent: Friday, January 25, 2008 6:36 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Unprovisioned 7961


Hi Everyone,

I am having some issues getting my 7961 working with Trixbox. I have
loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes
into an unprovisioned state. A status message shows up and says "Error
Verifying Config Info". 

I have read quite a bit on this topic (getting 7961's to work with
Asterisk and TB) and only came across a few postings where other people
encountered this issue but no solution was given. I have checked the
SEP.cnf.xml file for the phone and everything seems to be right. I even
tried to remove some parts of the code as people suggested but no luck.
I already have a 7960 on TB so I know that TFTP is working correctly.

Any ideas on how I can get this to work would be much appreciated.

Thank. 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________