[asterisk-users] Lamps on Snom phones

[Stefan Guenther]

Phil Knighton schrieb:
> Thanks for your reply Stefan :-)
>
> I'm using Asterisk 1.4.10 now, I was using 1.2.16.  My config hasn't
> changed between the two, both had the hints set in extensions.conf with
> entries such as "exten => 510,hint,SIP/510".
>
> Each of the Snom phones has function keys programmed with the relevant
> phones to monitor, with a function key set to "Extension" ("Destination"
> on older Snoms) and "<sip:510 at 10.0.0.30;user=phone>" - for example.  The
> keys will still call the programmed phone when pressed, but that is the
> only time the lamp works - when physically pressed.  If I dial 510
> manually, the "510 function key" used to flash to show it was ringing.
> This no longer happens.
>
> This was all working fine on 1.2, but since moving to 1.4 all of the
> lamps on all of the phones have stopped working!
>
> I've tried the points mentioned in a previous answer with no luck, as
> far as I can see form the examples in extension.conf (v1.4) I have
> configured the hints correctly. I've also checked the sip.conf file, and
> set the subscription settings as follows:
>
> allowsubscribe=yes
> subscribecontext=softoption-hints
> notifyringing=yes
> notifyhold=yes
> limitonpeers=yes
>
> What next?
>   
well, what do the commands "core show hints" and "sip show 
subscriptions" tell you?

Stefan

-- 

********************************************
in-put GbR - Das Linux-Systemhaus
Stefan-Michael Guenther
Geschaeftsfuehrer
Moltkestrasse 49     D-76133 Karlsruhe
Tel./Fax : +49 (0)721 / 83044 - 98/93
http://www.in-put.de
********************************************
     Schulungen  Installationen  
         Beratung   Support
      Voice-over-IP-Loesungen
********************************************