[asterisk-users] Missing "zap" command in Asterisk 1.4.16

Raúl Gómez C. raulgomez at cantv.net
Wed Jan 2 14:11:52 CST 2008


Hi list,

I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap
show" I get the message  "*No such command 'zap show'*".

I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the
latest wanpipe too.

zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know
what's happening here!!!

Any ideas???

Thanks in advance!!

Note: Below are my zapata.conf and zaptel.conf files


############ BEGIN ZAPATA.CONF ########
;autogenerated by /usr/local/sbin/config-zaptel  do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A400 [slot:4 bus:16 span:1]
context=from-internal
group=1
signalling = fxo_ks
channel => 1

context=from-internal
group=1
signalling = fxo_ks
channel => 2

context=from-zaptel
group=0
signalling = fxs_ks
channel => 3

context=from-zaptel
group=0
signalling = fxs_ks
channel => 4

context=from-zaptel
group=0
signalling = fxs_ks
channel => 5

context=from-zaptel
group=0
signalling = fxs_ks
channel => 6

context=from-zaptel
group=0
signalling = fxs_ks
channel => 7

context=from-zaptel
group=0
signalling = fxs_ks
channel => 8

context=from-zaptel
group=0
signalling = fxs_ks
channel => 9

context=from-zaptel
group=0
signalling = fxs_ks
channel => 10

context=from-zaptel
group=0
signalling = fxs_ks
channel => 11

context=from-zaptel
group=0
signalling = fxs_ks
channel => 12
############# END ZAPATA.CONF ######

############# BEGIN ZAPTEL.CONF ######
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us

#Sangoma A400 [slot:4 bus:16 span:1]
fxoks=1
fxoks=2
fxsks=3
fxsks=4
fxsks=5
fxsks=6
fxsks=7
fxsks=8
fxsks=9
fxsks=10
fxsks=11
fxsks=12
############ END ZAPTEL.CONF #######

-- 
Raul
Linux Counter #156439
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080103/19946e4e/attachment.htm 


More information about the asterisk-users mailing list