Hi list,<br><br>I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "<i>No such command 'zap show'</i>".<br><br>I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too.
<br><br>zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!!<br><br>Any ideas???<br><br>Thanks in advance!!<br><br>Note: Below are my zapata.conf and zaptel.conf files
<br><br><br>############ BEGIN ZAPATA.CONF ########<br>;autogenerated by /usr/local/sbin/config-zaptel do not hand edit<br>;Zaptel Channels Configurations (zapata.conf)<br>;<br>;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
<br><br>[trunkgroups]<br><br>[channels]<br>context=default<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>
cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>relaxdtmf=yes<br>rxgain=0.0<br>txgain=0.0<br>group=1<br>callgroup=1<br>pickupgroup=1<br><br>immediate=no<br><br>;Sangoma A400 [slot:4 bus:16 span:1]
<br>context=from-internal<br>group=1<br>signalling = fxo_ks<br>channel => 1<br><br>context=from-internal<br>group=1<br>signalling = fxo_ks<br>channel => 2<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks
<br>channel => 3<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 4<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 5<br><br>context=from-zaptel<br>group=0<br>
signalling = fxs_ks<br>channel => 6<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 7<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 8<br><br>context=from-zaptel
<br>group=0<br>signalling = fxs_ks<br>channel => 9<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 10<br><br>context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 11<br><br>
context=from-zaptel<br>group=0<br>signalling = fxs_ks<br>channel => 12<br>############# END ZAPATA.CONF ######<br><br>############# BEGIN ZAPTEL.CONF ######<br># Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
<br># Zaptel Channels Configurations (zaptel.conf)<br>#<br>loadzone=us<br>defaultzone=us<br><br>#Sangoma A400 [slot:4 bus:16 span:1]<br>fxoks=1<br>fxoks=2<br>fxsks=3<br>fxsks=4<br>fxsks=5<br>fxsks=6<br>fxsks=7<br>fxsks=8<br>
fxsks=9<br>fxsks=10<br>fxsks=11<br>fxsks=12<br>############ END ZAPTEL.CONF #######<br><br>-- <br>Raul<br>Linux Counter #156439