[asterisk-users] Lamps on Snom phones

[Michiel van Baak]

On 17:28, Wed 02 Jan 08, Phil Knighton wrote:
> Thanks for your reply Stefan :-)
> 
> I'm using Asterisk 1.4.10 now, I was using 1.2.16.  My config hasn't
> changed between the two, both had the hints set in extensions.conf with
> entries such as "exten => 510,hint,SIP/510".
> 
> Each of the Snom phones has function keys programmed with the relevant
> phones to monitor, with a function key set to "Extension" ("Destination"
> on older Snoms) and "<sip:510 at 10.0.0.30;user=phone>" - for example.  The
> keys will still call the programmed phone when pressed, but that is the
> only time the lamp works - when physically pressed.  If I dial 510
> manually, the "510 function key" used to flash to show it was ringing.
> This no longer happens.
> 
> This was all working fine on 1.2, but since moving to 1.4 all of the
> lamps on all of the phones have stopped working!
> 
> I've tried the points mentioned in a previous answer with no luck, as
> far as I can see form the examples in extension.conf (v1.4) I have
> configured the hints correctly. I've also checked the sip.conf file, and
> set the subscription settings as follows:
> 
> allowsubscribe=yes
> subscribecontext=softoption-hints
> notifyringing=yes
> notifyhold=yes
> limitonpeers=yes
> 
> What next?
> 

I think the snom phones now have type 'asterisk BLF' as
type. Try that

-- 

Michiel van Baak
michiel at vanbaak.eu
http://michiel.vanbaak.eu
GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD

"Why is it drug addicts and computer afficionados are both called users?"