[asterisk-users] ISDN PRI settings for Telus BC network

Gondar Monn gondarmd at gmail.com
Sat Dec 6 20:09:12 CST 2008


Thanks a lot, will let you know how things are going when I get them to turn
on two way dialing .
By the way any pointers on how to connect to Portmaster ?
Looks like we are going to have to share some PRIs lines with portmaster
(dialup)

FYI, I am sticking with Asterisk 1.4 for now ...

Thanks!

Gondar

On Sat, Dec 6, 2008 at 3:49 PM, Trevor Peirce <tpeirce at digitalcon.ca> wrote:

> Gondar Monn wrote:
> > Hi there!
> > Does anyone deal with Telus in BC ? We have some PRI lines that were
> > used for dialup, would like to convert them for pbx system, talked
> > with some technicians @ Telus, but the information given was not
> > clear, kind of: "try this see if it works...." Does anyone here have
> > the settings required to talk to there equipment ?
>
> A few years ago I had a PRI from TELUS.  The winning zaptel.conf line:
>
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> And in zapata.conf it was
>
> switchtype=national
> pridialplan=unknown
> prilocaldialplan=national
> signalling=pri_cpe
>
>
> These are both from the asterisk 1.2 days so a lot may have changed
> between now and then...
>
> Hope this helps,
> Trevor
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081206/044427ec/attachment.htm 


More information about the asterisk-users mailing list