[asterisk-users] Using DECT phones as SIP phones?

[Fred Posner]

On Dec 5, 2008, at 11:31 AM, Michael Graves wrote:

> On Fri, 05 Dec 2008 10:59:54 -0500, Neil Fusillo wrote:
>
>> Michael,
>>
>> Was there something particularly special you had to do to get your  
>> M3 to
>> work? I'm now on my second one from E4 Technologies (from whom I'm  
>> still
>> waiting for a return service call), and both of them, after following
>> the instructions in the manual, have the same problem.
>>
>> Neither one will pick up an IP from DHCP.  If I set a static IP  
>> with the
>> handset (which pairs to the base just fine), I can then ping them  
>> when
>> they boot, but the web configuration service is unavailable (nothing
>> running on port 80, as if it never gets through the boot process).
>>
>> Hitting the up volume button on the phone gives me info of an
>> ff:ff:ff:ff:ff:ff mac accress, no IP (with DHCP) or the static I've  
>> put
>> in, and a Boot Status of 'Failed'
>>
>> Was there a trick to getting these running? I've done a factory  
>> reset.
>> I've tried different cables. Different switches. Now different  
>> handsets
>> and base stations. Nothing. Same message every time.
>
>> Did you run into anything similar, or am I just lucky?
>
> I had no such troubles. Just plugged in and went. What firmware  
> release
> does it have? Mine were v1.22 just the other day when I checked, but I
> have it set to D/L the current beta automatically once a day.
>
> Michael
> --

Mine automatically updated as soon as it got an IP address. (default  
setting)





Fred Posner
fred at teamforrest.com

Main:		+1 (212) 937-7844
Direct:	+1 (503) 914-0999

www.teamforrest.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081205/aea10a55/attachment.htm