[asterisk-users] Dahdi and ztdummy

[David fire]

options are:
-you made a mistake

-only g'ds know....

probably when you installed dahdi you made "make config" in only one pc.

David



2008/12/2 Mike <list at virtutel.ca>

>  Sorry, that worked, I just removed all modules from the modules file in
> /etc/dahdi.
>
>
>
> But that doesn`t explain why my other card-free PC is working perfectly
> with the default modules files while this one isn`t…
>
>
>
> Thanks though, that saved my behind.  But an explanation, if an easy one
> can be found, would be appreciated.
>
>
>
> Mike
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *David fire
> *Sent:* Tuesday, December 02, 2008 19:00
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Dahdi and ztdummy
>
>
>
> ok
> dont pay attention to that file for now...
> do you have any card on that machine? any digium card or any other brand?
> or not?
> if not the problem is that you dont need to load any module.... (just the
> dummy one)
> if you have any card you have a problem in the config.
> David
>
>
>  2008/12/2 Mike <list at virtutel.ca>
>
> Thanks Joseph.  I went and read thos pages, nothing helps me.  As
> mentionned
> in my other post, I don`t have a /dev/dadhi file....I don`t know why it
> wasn`t created or where to go from here.
>
>
> Mike
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
>
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph L.
> Casale
> Sent: Tuesday, December 02, 2008 18:24
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Dahdi and ztdummy
>
> >I did build dahdi before building asterisk, but that`s it.
>
> No problem. But what steps did you use? Did you edit *any* dahdi related
> configs? See the voip-info url below.
>
> >I find it hard to find any documentation referring to dadhi instead of
> zaptel.
>
> :) Yeah, it's not the most documented aspect of Asterisk, but there is
> enough for your need...
>
> >I have no Digium hardware, but I still need the ztdummy timer (or whatever
> it`s called now).  How do I get myself going?
>
> Well you need to check the README, for your application it has all you need
> to know:
> http://svn.digium.com/svn/dahdi/linux/tags/2.0.0/README
>
> Installation
> ~~~~~~~~~~~~
> Note: If using `sudo` to build/install, you may need to add /sbin to your
> PATH.
>
>  make
>  make install
>
> Note that you'll need the utilities provided in the package dahdi-tools
> to configure DAHDI devices on your system.
>
> At the bottom of that file, it points you to a source for making the
> transition when reading older docs:
> http://voip-info.org/wiki/view/DAHDI
>
> I suggest you pull in dahdi-linux-complate, run #make, #make install, #make
> config, then #chkconfig dahdi on (or your distro equiv) and the bare
> configs
> that get installed will allow all modules to load, see that there is no
> hardware and fall back to dahdi_dummy.
>
> Do an lsmod and look for something like so:
> [root at host ~]# lsmod | grep dahdi
> dahdi_dummy            38984  0
> dahdi                 231760  9
> dahdi_dummy,xpp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp
> crc_ccitt              35265  1 dahdi
>
> Also,
> [root at host ~]# cat /proc/dahdi/1
> Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER)
>
> Note that UPGRADE.txt suggests:
> http://svn.digium.com/svn/dahdi/linux/tags/2.0.0/UPGRADE.txt
> * This package no longer includes the 'menuselect' utility for
>  choosing which modules to build; all modules that can be built are
>  built automatically.
>
>
> HTH,
> jlc
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> (\__/)
> (='.'=)This is Bunny. Copy and paste bunny into your
> (")_(")signature to help him gain world domination.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
(\__/)
(='.'=)This is Bunny. Copy and paste bunny into your
(")_(")signature to help him gain world domination.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081202/c8efc056/attachment.htm