[asterisk-users] X100P Card in OFFHOOK state

[Jay Ray]

After I make a call o n the Zaptel Card X100P FXO module....it remains offhook state as shown here...

Signalling Type: FXS Kewlstart
Radio: 0re2uk*CLI>
Owner: <None>*CLI>
Real: <None>k*CLI>
Callwait: <None>I>
Threeway: <None>I>
Confno: -12uk*CLI>
Propagated Conference: -1
Real in conference: 0
DSP: noore2uk*CLI>
Relax DTMF: noCLI>
Dialing/CallwaitCAS: 0/0
Default law: ulaw>
Fax Handled: noLI>
Pulse phone: noLI>
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook



------------------
Sometimes it still takes a new call while in this state and sometimes rejects it...
How to correct it such that after I hangup a call it goes back to onhook state...

reloading wcfxo module using modprobe clears the issue....





      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080826/2cc4b2a5/attachment.htm