[asterisk-users] frequent channel reset problem

Ming-Ching Tiew mctiew at yahoo.com
Fri Aug 22 18:00:28 CDT 2008


Sorry to have posted reply to your email directly.
Repost to maillist.

resetinterval already set to never to start with.

Thanks


--- On Fri, 8/22/08, Ming-Ching Tiew <mctiew at yahoo.com> wrote:

> From: Ming-Ching Tiew <mctiew at yahoo.com>
> Subject: Re: [asterisk-users] Fw: [asterisk-dev] frequent channel reset problem
> To: "Steve Totaro" <stotaro at totarotechnologies.com>
> Date: Friday, August 22, 2008, 10:58 PM
> --- On Fri, 8/22/08, Steve Totaro
> <stotaro at totarotechnologies.com> wrote:
> 
> > From: Steve Totaro
> <stotaro at totarotechnologies.com>
> 
> > 
> > Try setting resetinterval to never.
> > 
> > resetinterval: sets the time in seconds between
> restart of
> > unused
> > channels, defaults to
> > 3600 minimum 60 seconds. Some PBXs don't like
> channel
> > restarts. so set
> > the interval to a
> > very long interval e.g. 100000000 or 'never'
> to
> > disable *entirely*.
> > 
> 
> Already did that, this is my zapata.conf :-
> 
> [channels]
> switchtype=euroisdn
> pridialplan=national
> resetinterval=never
> 
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> 
> rxgain=0
> txgain=0
> 
> 
> echocancel=yes
> echocancelwhenbridged=yes
> 
> ;echocancel=no
> ;echocancelwhenbridged=no
> 
> ;echotraining=no
> 
> ;faxdetect=both
> ;faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=yes
> faxdetect=no
> 
> group=1
> ;signalling=pri_cpe
> signalling=pri_net
> context=incoming
> channel => 1-15,17-31
> 
> jbenable=yes
> jbforce=yes
> jbmaxsize=200
> 
> 
> ;jbimpl=adaptive
> ;jbimpl=fixed
> ;jbresyncthreshold = 4000
> 
> group=2
> signalling=pri_cpe
> context=outgoing
> channel => 32-46,48-62
> 
> ;jbenable=yes
> ;jbforce=yes
> ;jbmaxsize=200
> 
> 
> And my zaptel.conf :-
> span=1,0,0,ccs,hdb3,crc4
> span=2,1,0,ccs,hdb3,crc4
> 
> #Span 1 Channel Definition 
> bchan=1-15,17-31
> #hardhdlc=16
> dchan=16
> 
> 
> #Span 2 Channel Definition
> bchan=32-46,48-62
> #hardhdlc=47
> dchan=47
> 
> loadzone = uk
> defaultzone = uk


      



More information about the asterisk-users mailing list