[asterisk-users] Unable to load module chan_zap.so

[Jeremy Malcolm]

I am having trouble with chan_zap.so not loading.  When I load it from  
modules.conf, Asterisk bails out without any error message.  When I  
load it from the console, it just says "Unable to load module  
chan_zap.so" no matter what verbose level I am using.

dmesg says:

Zaptel Version: 1.4.4
Zaptel Echo Canceller: MG2
Freshmaker version: 73
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
Registered tone zone 1 (Australia)

lsmod says:

wctdm                  30912  0
wcfxo                   9344  0
zaptel                180388  2 wctdm,wcfxo

ztcfg -vv says:

Zaptel Version: 1.4.4
Echo Canceller: MG2
Configuration
======================

Channel map:

Channel 01: FXO Loopstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels to configure.

cat /proc/zaptel/* says:

Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

	   1 WCTDM/0/0 FXOLS
	   2 WCTDM/0/1 FXSKS
	   3 WCTDM/0/2 FXSKS
	   4 WCTDM/0/3 FXSKS

/etc/zaptel.conf is:

  # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxols=1
fxsks=2
fxsks=3
fxsks=4

# Global data
loadzone	= au
defaultzone	= au

I have Googled for help but not found anything.  Does anyone have any  
suggestions?

TIA

-- 
Jeremy Malcolm LLB (Hons) B Com
Internet and Open Source lawyer, IT consultant, actor
host -t NAPTR 1.0.8.0.3.1.2.9.8.1.6.e164.org|awk -F! '{print $3}'

Luxury Perth apartment for sale!
http://www.yourestate.com.au/sresult.php?property_id=8581