[asterisk-users] Cisco 7965 SIP Firmware

[Razza]

On 31/03/2008, Greg Oliver <greg.oliver at cistera.com> wrote:
>
> For a 7965, you might try loadinformation to be 335..  I have had to
> match up CCM tk.prod values to match on newer phones in the past to be
> what cisco uses in their internal database before I could get them to
> work.  Although, leaving those lines out completely will work as well
> assuming they already have the SIP firmware loaded..


8<-------- SNIP -------->8

My modified base XMLDefault.cnf.xml is detailed below. But still I get no
further than /var/log/messages showing in.tftp stops sending after
XMLDefault.cnf.xml.

I have tried it with loadInformation as follows:
<loadInformation335 model="IP Phone 7965">SIP45.8-3-4SR1S
</loadInformation335>
<loadInformation335 model="IP Phone 7965">term65.default
</loadInformation335>
<loadInformation335>SIP45.8-3-4SR1S</loadInformation335>
<loadInformation335>term65.default</loadInformation335>

I also notice in the voip-info article (admittedly for 79x1 phones) the xml
stats and ends in <device> and </device> - is this correct?

<Default>
<callManagerGroup>
    <members>
       <member priority="0">
          <callManager>
             <ports>
                <ethernetPhonePort>2000</ethernetPhonePort>
                <mgcpPorts>
                   <listen>2427</listen>
                   <keepAlive>2428</keepAlive>
                </mgcpPorts>
             </ports>
             <processNodeName></processNodeName>
          </callManager>
       </member>
    </members>
 </callManagerGroup>
<loadInformation335 model="IP Phone 7965">SIP45.8-3-4SR1S
</loadInformation335>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<servicesURL></servicesURL>
</Default>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080401/362d9371/attachment.htm