[asterisk-users] WARNING: chan_zap.c process_zap: Ignoring signalling

[Vincent]

Hello

	I've been googling for this message, but can't find why
Asterisk sends a warning. The configuration files look similar to
http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf.sample

It's a TDM card with just one FXO module on it, and I connected an
RJ11 cable to it from the wall plug:

# cat /etc/zaptel.conf 
fxsks=1
loadzone=fr
defaultzone=fr

# ztcfg -vv
Zaptel Version: 1.4.5.1
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

# lsmod | grep zap
zaptel                189860  7 zttranscode,ztdummy,wctdm
crc_ccitt               3072  2 zaptel,hisax

# cat /etc/asterisk/zapata.conf 
[channels]
context=my-phones
usecallerid=yes
hidecallerid=no
immediate=no

signalling=fxs_ks
echocancel=yes
channel => 1

ubuntu*CLI> reload chan_zap.so
    -- Reloading module 'chan_zap.so' (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
[Oct 21 16:22:37] WARNING[8240]: chan_zap.c:11120 process_zap:
Ignoring signalling
    -- Reconfigured channel 1, FXS Kewlstart signalling
  == Parsing '/etc/asterisk/users.conf': Found
ubuntu*CLI> 

Any idea? Should I just ignore this warning?

Thank you.