[asterisk-users] Selecting a specific line from Zap/g

[Eric "ManxPower" Wieling]

No, ignorepat is for FXS ports (FXS ports use FXO signaling).  Also, 
ignorepat does not apply to SIP phones, because SIP phones provide their 
own dialtone, not a dialtone provided by Asterisk.

Al lists wrote:
> Correction, on FXO port not FXS,
> second, read his email first:
> "Also, how it will be possible to assign an dedicated
> line (connected to FXO) to an
> button on the Polycom IP Phone or Broadtel IP Phone,
> so if user select that button
> then he will be sure that his outside call will be via
> that specific line."
> Just assign a key on your phone to dial that extension, and you will have
> dial tone on selected line,
> then as a traditional PBX you can send any digits to your provider.
> 
> 
> On 10/1/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
>> ignorepat continues dialtone after a leading digit has been dialed on
>> FXS ports.  How does ignorepat help this guy?
>>
>> Al lists wrote:
>>> ignorpat is your friend
>>>
>>> On 9/30/07, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
>>>> On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote:
>>>>> Dear List;
>>>>>
>>>>> How can I place a call via Zap/g1 (group) but need to
>>>>> determine the line (FXO port)
>>>>> that will go via it?
>>>> Simply don't use groups. Use channels directly. To dial via the
>> specific
>>>> Zaptel channel NN, use Zap/NN
>>>>
>>>> Am I missing anything?