[asterisk-users] Fw: Remove a TDM Card

Tzafrir Cohen tzafrir.cohen at xorcom.com
Fri Nov 30 04:35:24 CST 2007


On Thu, Nov 29, 2007 at 11:14:12AM +0100, Sasa wrote:
> Hi, my problem isn't on new voip box with latest asterisk version...my 
> problem is on voip with Asterisk 1.2.13 where I must remove TDM Card, this 
> steps for remove rightly TDM Card:
> 
> - remove line configuration about tdm card in zapata.conf and zaptel.conf
> - remove in  rc.modules and rc.modules-2.4.33.3 line:
> /sbin/modprobe wctdm24xxp && /sbin/ztcfg -vvvvvv
> - rmmod wctdm24xxp
> - halt
> - remove physically card tdm from pc (box voip 1)
> - restart box voip 1
> 
> ..this procedure is ok ?
> Thanks !

Totally wrong.

No need to unload the modules before you shut down the system.

No need to "deconfigure" them just before you shut down just because you
happen to be removing them later.

What you need to do:

edit /etc/zaptel.conf and /etc/asterisk/zapata.conf to match your new
configuration , shut down the box, take away the card and boot again.

The proper configuration, in a different page.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir



More information about the asterisk-users mailing list