[asterisk-users] SLA broken in 1.4.3?

David W. Rice rice at lexingtonitconsulting.com
Sun May 6 09:51:06 MST 2007


You do not need a zaptel card for ztdummy.  And on the phone itself, the
extensions were still configured as "private".  SLA on a Polycom through
* is just presence on a line key (aka speed dial) + autoOffHook.



-----Original Message-----
From: Jay Austad [mailto:austad at signal15.com] 
Sent: Sunday, May 06, 2007 2:11 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] SLA broken in 1.4.3?

Doh, I didn't compile meetme support into this install because it  
said it required a zaptel card for the hardware timers.  I have a  
spare zaptel card, but I'd rather not install it if I don't have to.   
I didn't know of the ztdummy module, I will compile this and then  
recompile asterisk.

I could certainly use the sla config samples or any info you have for  
this.  The documentation included for the SLA feature is not the  
greatest.  I assume that when you set up the shared lines on the  
phone itself, you mark those extensions as shared?

Thanks!

~jay

On May 5, 2007, at 12:46 PM, David W. Rice wrote:

> SLA requires meetme which requires at a minimum ztdummy.  So, you must
> compile and install zaptel, then compile and install asterisk 1.4.3  
> and
> the sla commands will be in the CLI.  Let me know if you need help
> setting up SLA on Polycom phones with *.  I've done it successfully  
> and
> have the configs.  I'm going to put them on the web some time soon.
>
>
> -----Original Message-----
> From: Jay Austad [mailto:austad at signal15.com]
> Sent: Friday, May 04, 2007 8:48 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] SLA broken in 1.4.3?
>
> I configured my sla.conf to use with a Polycom phone.  I have no idea
> if I did it right, however, none of the console "sla" commands
> exist.  Do I have to something special to compile in this support, or
> should it just work out of the box?
>
> ~jay
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list