[asterisk-users] Linksys SPA3012 inbound FXO problems

[lenz]

Hello list,
hope someone can help me - I'm going crazy using the FXO port a SPA3012.
I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that  
is, once it detects a call, it should simply send it over to the local  
Asterisk server. No intelligent routing, PIN, anything else....

I configured it like this:

PSTN-To-VoIP Gateway Setup
PSTN-To-VoIP Gateway Enable: yes
PSTN Caller Auth Method: none
PSTN Ring Thru Line 1: no
PSTN Caller Default DP: 1

Then I configured the dialplan #1 as:
Dial Plan 1: (S0<:@gw1>)

And I configured gateway 1 as:

Gateway Accounts
Gateway 1:     my.asterisk.server		
GW1 NAT Mapping Enable:	 no
GW1 Auth ID:   --my-sip-login--
GW1 Password:  --my-sip-password--

But it seems to simply ignore incoming calls at all....
Anybody's got a pointer to get me started?
Thanks in advance,
l.



-- 
Home of QueueMetrics - http://queuemetrics.com