[asterisk-users] TDM400P and TE405P

[Tzafrir Cohen]

On Tue, May 01, 2007 at 02:01:33PM -0400, Nitesh Divecha wrote:
> Hello All,
> 
> To avoid conflicts I removed TE405P and left the TDM400P and 
> reconfigured the card using "genzaptelconf".
> 
> When I run ztcfg -vv I saw the card and modules are loaded and also I 
> used "ztmonitor 1 -v" and I saw the gain moving up and down. I did 
> create trunks and outbound routes using FreePBX...
> 
> Now for some odd reason Asterisk is not picking up the incoming call 
> from PSTN.
> 
> zapata-channels.conf
> ===============
> ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> ;;; line="1 WCTDM/0/0"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-zaptel
> channel => 1
> context=default
> ...
> 
> 
> zapata.conf
> ========
> #include zapata-channels.conf
> 
> Can anyone put some light why Asterisk is failing to pickup the call.

What do you see in 'zap show channels' in the Asterisk CLI?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir