[asterisk-users] Polycom SoundPoint 501

[Darryl Dunkin]

What transport method are you using? Sounds like you are using DNSnaptr
without specifying a port. When set to DNSnaptr, be sure you have both
the hostname and port (5060) defined.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paolo
Supino
Sent: Wednesday, March 28, 2007 17:18
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom SoundPoint 501

Hi

  We've setup an Asterisk PBX recently and I encountered the following 
problem: When [mac address]-registration.cfg file includes the FQDN of 
the Asterisk PBX for the Polycom SoundPoint 501 phones it will not (even

try to) register with the Asterisk PBX unless the DNS (it asks) 
successfully resolves the name: _sip._udp.[Asterisk FQDN]. Did this 
happen to anyone else?






PS - The application version running on the SoundPoint 501s is
1.6.7.0098





TIA
Paolo

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users