[asterisk-users] Asterisk 1.4 and chan_misdn

[Pierre Burton]

Hi,

you also need mISDNuser.

After that make clean && make install you'll have access to chan_misdn.

Regards.

Pierre

Administrator TOOTAI wrote:
> Hi list,
> 
> I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from 
> SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in 
> zaptel dir and: make, make install, make b410p. Everything is ok. Now I 
> want to compile Asterisk but can't activate the chan_misdn channel which 
> depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E)
> 
> When I made the make b410p, all the misdn stuff was downloaded from 
> digium's ftp. Also, running /etc/init.d/misdn-init --scan show me the 2 
> cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf 
> and after a /etc/init.d/misdn-init start I see:
> 
> mISDN_dsp             191656  0
> mISDN_capi             88716  0
> mISDN_l2               34452  0
> mISDN_l1               11036  0
> mISDN_core             71360  6 
> mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
> kernelcapi             44576  2 mISDN_capi,capi
> 
> My questions: why Asterisk doesn't want to let me activate the misdn 
> channel? Is misdn ready for 1.4?
> 
> Thanks for any hint
>