[asterisk-users] Cisco 7970 with skinny on * 1.4.1

[Pavel Jezek]

If you have 7970 right configured to point to asterisk server, you 
should be able to see some skinny debug on console, or look what report 
"skinny show devices"
I haven't any 7970, so can't help so much, I'm using only 7920 wifi 
phone with chan_skinny and 1.4trunk, it's usable, basic functionality is 
working, but don't expect too much,
btw, if you have money to buy this highend phone with proprietary 
signaling, why don't connect to callmanager?
asterisk will never support all features available in proprierary system 
as good as "original" ;-)
PJ





Richard Klingler wrote:
> Hmm..interestingly no one answered if chan_skinny works with 7970G
> on * 1.4.x (o;
>
> I know that CIsco phones are bad with NAT and SIP...old story (o;
> THat's why I use local Cisco phones with SIP and local * which then
> connects to outside * vis IAX...
>
>
> cheers
> rick
>
>
> Hermann Wecke schrieb:
>> Richard Klingler wrote:
>>> Has any1 got their 7970 to work with * 1.4.x ?
>>
>> Why don't you use 7970 with SIP firmware? I'm running SIP 8.0.4SR2
>> without problems (Asterisk 1.2.16). Just remember that 7970 only will
>> register if your Asterisk is at the same network - no NAT between 
>> them - check http://preview.tinyurl.com/345fmj
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> .
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users