[asterisk-users] asterisk n-way call problem

[Rajeev Natarajan]

Any sip debug you may have?

You might want to check your timing source. if you don't have a digium card,
to see if you have ztdummy installed correctly. Meetme requires a timing
source.

rajeev

On 3/15/07, Rizwan Hisham <rizwanhasham at gmail.com> wrote:
>
> Hi,
> i am using the n-way-call dialplan solution found on voip-info.  i have
> added its entry in applicationmap of features.conf file. the problem
> is......its not working. to activate the n-way call i dial *0 but nothing
> happens. i have played around with dtmf and codec settings but no success.
> the extensions and sip configuration is below if you want to have a look. I
> dont have any clue why its not working.
>
>
> #######################extensions.conf#######################################
> [local]
> exten => _XX,1,Set(DYNAMIC_FEATURES=nway-start)
> exten => _XX,2,SIPDtmfMode(inband)
>
> exten=> 10,3,Dial(SIP/saad,,tT)
> exten=> 10,n,Hangup
>
> exten=> 11,3,Dial(SIP/riz,,tT)
> exten=> 11,n,Hangup
>
> exten=> 12,3,Dial(SIP/rehmat,,tT)
> exten=> 12,n,Hangup
>
> [dynamic-nway]
> exten => _XXX,1,Answer
> exten => _XXX,n,Set(CONFNO=${EXTEN})
> exten => _XXX,n,Set(MEETME_EXIT_CONTEXT=dynamic-nway-invite)
> exten => _XXX,n,Set(DYNAMIC_FEATURES=)
> exten => _XXX,n,MeetMe(${CONFNO},pdMX)
> exten => _XXX,n,Hangup
>
> [dynamic-nway-invite]
> exten => 0,1,Read(DEST,dial,,i)
> exten => 0,n,Set(DYNAMIC_FEATURES=nway-inv#nway-noinv)
> exten => 0,n,Dial(Local/${DEST}@dynamic-nway-dest,,g)
> exten => 0,n,Set(DYNAMIC_FEATURES=)
> exten => 0,n,Goto(dynamic-nway,${CONFNO},1)
> exten => i,1,Goto(dynamic-nway,${CONFNO},1)
>
> [dynamic-nway-dest]
> exten => _XXX,1,Dial(SIP/${EXTEN})
>
> [macro-nway-start]
> exten => s,1,Set(CONFNO=${FindFreeConf()})
> ;exten => s,n,ChannelRedirect(${BRIDGEPEER},dynamic-nway,${CONFNO},1)
> exten => s,n,ChannelRedirect(${BRIDGEPEER},dynamic-nway,${CONFNO},1)
> exten => s,n,Read(DEST,dial,,i)
> exten => s,n,Set(DYNAMIC_FEATURES=nway-inv#nway-noinv)
> exten => s,n,Dial(Local/${DEST}@dynamic-nway-dest ,,g)
> exten => s,n,Set(DYNAMIC_FEATURES=)
> exten => s,n,Goto(dynamic-nway,${CONFNO},1)
>
> [macro-nway-ok]
> exten => s,1,ChannelRedirect(${BRIDGEPEER},dynamic-nway,${CONFNO},1)
>
> [macro-nway-notok]
> exten => s,1,SoftHangup(${BRIDGEPEER})
>
>
> #########################sip.conf###############################################
> [saad]
> userid=saad
> secret=1234
> host=dynamic
> type=friend
> context=local
> qualify=4000
> insecure=invite,port
> dtmfmode = inband
> disallow = all
> allow=ulaw
>
> [riz]
> userid=riz
> secret=1234
> host=dynamic
> type=friend
> context=local
> qualify=4000
> dtmfmode = inband
> disallow = all
> allow=ulaw
>
>
> [rehmat]
> userid=rehmat
> secret=1234
> host=dynamic
> type=friend
> context=local
> qualify=4000
> insecure=invite,port
> dtmfmode = inband
> disallow = all
> allow=ulaw
>
>
>
> #########################features.conf###############################################
> [applicationmap]
> nway-start => *0,self,caller,Macro,nway-start
> nway-inv => **,self,caller,Macro,nway-ok
> nway-noinv => *#,self,caller,Macro,nway-notok
>
> ;nway-start => *0,caller,Macro,nway-start
> ;nway-inv => **,caller,Macro,nway-ok
> ;nway-noinv => *#,caller,Macro,nway-notok
>
> --
> Regards
> Rizwan Hisham
> Software Engineer
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070322/daca16c3/attachment.htm