[asterisk-users] TDM400p, no CLI activity

[Giorgio Incantalupo]

Hi joe,
seems like your card is working but not your modules...have you checked 
if the led on the TDM400P are on?
Try to change the FXO/FXS modules, maybe they are not working good.


Giorgio


joe acquisto wrote:
> New install, using TDM400p.  wctdm is loaded, asterisk loads.   Zaptel and zapata.conf are from a working system, same model board, same module locations.
>
> CLI command zap show status shows all OK, zap show channels shows nothing defined.
>
> Incoming calls show nothing on CLI, analog handsets have no dial tone and, of course, shown nohting on CLI.
>
> joe a.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>