[asterisk-users] Re: asterisk-users Digest, Vol 32, Issue 67

[Yeruult Dorjsuren]

Hi,

What version of asterisk and zaptel are you using? I've used digium
TE110P card with mfcr2. I had same "T1 timed out" problem too. I've
asked from support and got answer to install latest zaptel. I've
installed zaptel 1.2.13 and it solved. In short try latest asterisk
v1.2.x packages with unicall.

>> Hi List,
>> I'm trying to connect Asterisk with a Nortel Meridian using an E1 with
>> MRFR2 signaling.
>> I've connected both cards, and compiled all the required software...
>>
>> The problem is every call (outgoing or incoming) got dropped,
>> complaining about some "T1 timed out"
>>
>> Only for testing purposes I'm using an application called testcall
>> included on the lib-unicall package, and this are the logs:
>>
>> Chan 1, class 'mfcr2', variant 'mx,0,4', end 335544324, caller 1, from
>> '7000' to '6640'
>> Loading protocol mfcr2
>> Thread for channel 0
>> MFC/R2 Chan   1: Call control(8)
>> MFC/R2 Chan   1: Unblock
>> MFC/R2 Chan   1: 1001  ->      [1/40000000/Idle          /Idle         ]
>> MFC/R2 Chan   1: far_unblocking_expired
>> MFC/R2 Chan   1: local_unblocking_expired
>> Chan   1: -- Far end unblocked! :-)
>> Chan   1: -- Far end unblocked! :-)
>> Chan   1: -- Local end unblocked! :-)
>> Chan   1: -- Local end unblocked! :-)
>> Chan   1: Initiating call
>> MFC/R2 Chan   1: Call control(1)
>> MFC/R2 Chan   1: Make call
>> MFC/R2 Chan   1: Making a new call with CRN 32769
>> MFC/R2 Chan   1: 0001  ->      [1/       1/Idle          /Idle         ]
>> Chan   1: -- Dialing on channel 0
>> Chan   1: -- Dialing on channel 0
>> MFC/R2 Chan   1:      <- 1101  [1/      40/Seize         /Idle         ]
>> MFC/R2 Chan   1: 6 on  ->      [2/      40/Group I       /Idle         ]
>> Main thread
>> MFC/R2 Chan   1: R2 prot. err. [2/      40/Group I       /DNIS         ]
>> cause 32769 - T1 timed out
>> MFC/R2 Chan   1: 6 off ->      [1/       1/Idle          /Idle         ]
>> MFC/R2 Chan   1: 1001  ->      [1/       1/Idle          /Idle         ]
>> Chan   1: -- Protocol failure on channel 0, cause (32769) T1 timed out
>> Chan   1: -- Protocol failure on channel 0, cause (32769) T1 timed out
>> MFC/R2 Chan   1:      <- 1001  [1/       1/Idle          /Idle         ]
>> MFC/R2 Chan   1: 1001  ->      [1/       1/Idle          /Idle         ]
>>
>> Have anyone know something about this??
>>
>>
>> --
>> Ing. Arturo Ochoa N
>> Network Administrator
>> Electrosystems,
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>





-- 
Best regards,
 Yeruult                            mailto:yeruult at icn-mn.net