[asterisk-users] Patton 1400

[Jean-Louis curty]

Hi,
I managed to install my patton gateway but i did not succeed to pass the
caller id to the sip phone on incoming calls ...
instead i see call from 105 ( which is the sip client extension of the
patton )

do you know the way to pass the caller id of the caller to the ip phone iso
the gw extension on incoming calls ?
thanks !
jean-louis


2006/11/4, Guido Hecken <guido.hecken at gwsnettech.de>:
>
> Hi Kevin,
>
> you have to create a gateway in the Smart Node:
>
> gateway sip sip
> bind interface eth1 router
>
> service default
>    domain gwsnettech.local
>    realm gwsnettech.local
>    authentication isdngw2 password huffvtzddzdjkhuztztufuz== encrypted
> default
>    default-server hallinux2.gwsnettech.local 5060 loose-router
>    registrar hallinux2.gwsnettech.local 5060
>
> In sip.conf, something like this:
>
> [isdngw2]
> type=friend
> username=isdngw2
> secret=the_unencrypted_password_from _above
> host=192.168.161.135
> ;host=dynamic
> fromuser=gwsnettech
> fromdomain=gwsnettech.local
> nat=no
> context=isdngw2-in
> canreinvite=no
>
> If you need a complete running config, I can send it to you offlist.
>
> Hope, it helps...
>
>
> Guido
>
> ________________________________________
> Von: Kevin Withnall [mailto:kevin at ilb.com.au]
> Gesendet: Samstag, 4. November 2006 05:58
> An: asterisk-users at lists.digium.com
> Betreff: [asterisk-users] Patton 1400
>
> I have a patton 1400 setup to handle the bri interface. As a trixbox user,
> I
> wanted a sip trunk rather than having to re-compile bri support into
> trixbix.
>
> Anyway, I have it working now so that asterisk can make calls and they are
> passed properly to the telephone network. Incoming calls however are
> another
> matter. I have (after turning on cli debug in the 1400) determined that
> its
> getting stuck in the routing system. I don't know what destination to make
> to get it to sip connect to the asterisk box.
>
> Ive tried making an interface that has a remote address of the asterisk
> box
> but that doesn't work. Can someone send me a config for anything they have
> done that is similar to this ? I believe the Patton 1200 is also the same
> unit apart from extra ports.
>
> Any help would be greatly appreciated.
>
> Regards
> Kevin
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070314/8784ea8e/attachment.htm