[asterisk-users] Earliest dial tone, after boot up.

[joe a.]

Thanks.  Very reassuring.   It really must be too early. <g>

joe a.

Tzafrir Cohen<tzafrir.cohen at xorcom.com> Wrote: 3/14/2007 8:23 AM:
> On Wed, Mar 14, 2007 at 07:53:58AM -0400, joe acquisto wrote:
>> New system install.
>> 
>> At what point, in bootup, should I be able to get a dial tone on the 
>> phone ports on a tdm400p?  There are two fxo and two fxs ports.  I 
>> know which to plug into .
> 
> Only after:
> 
> * The card's driver has loaded and initialized the card's module.
> * It has been configured (ztcfg)
> * Asterisk has started
> 
>> 
>> At boot up, as soon as wctdm is loaded, all the ports "go green, yet I 
>> do not get a dial tone on the phone ports.  I thought as long as 
>> zapata.conf is correct, the board should be "functional." at that 
>> point.
> 
> It is Asterisk that actually gives the dialtone. So it is not enough to
> have /etc/asterisk/zapata.conf properly configured. You also need
> asterisk running.
> 
> -- 
>                Tzafrir Cohen       
> icq#16849755                    jabber:tzafrir at jabber.org 
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users