[asterisk-users] _ALERT_INFO replacement in 1.4?

[Bruce Reeves]

Does SIPAddHeader(Alert-Info:) not do it?


On 3/12/07, Nikhil Jogia <nikhil at nikhiljogia.com> wrote:
> Hi All
>
> I have just upgraded from Asterisk 1.2 to 1.4 and am having trouble with
> with one of my ATAs not ringing.
>
> Basically, when I execute the Dial command, an error occurs: "Got SIP
> response 400 "In alert-info header: Empty value expected"
>
> Now in 1.2, I just issued the following command to overcome this
> problem: Set(_ALERT_INFO=).
>
> Now in 1.4, _ALERT_INFO is deprecated, so I have to use SIPAddHeader,
> but I don't know how, or if there is a way to remove the alert-info header.
>
> Here is my dialplan snippet:
>
> exten => s,9,Playback(my-greeting)
> exten => s,10,Wait(1)
> exten => s,11,SIPAddHeader(Alert-Info: info=bellcore-r4)
> exten => s,12,Dial(SIP/600&SIP/602&SIP/603,60,tm)
> exten => s,13,Set(_ALERT_INFO=)
> exten => s,14,Dial(SIP/604,60,tm)
> exten => s,15,Voicemail(su600)
> exten => s,16,Hangup
> exten => s,115,Voicemail(sb600)
> exten => s,116,Hangup
>
> As you can see, #13 is deprecated, so extension 604 does not ring.
> Extension 600, 602 and 603 are all hooked up to Sipura ATAs and need the
> bellcore-r4 ringtone to differentiate from other incoming lines.
>
> Any ideas?
>
> Thanks
>
> Nikhil Jogia
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Bruce
Nortex Networks