[asterisk-users] Issues with a Linksys SPA 2102 and asterisk

[Erick Perez]

where to change packet size?


On 3/9/07, Luki <lugosoft at gmail.com> wrote:
> > Any gurus out there with experience with the SPA 2102 against asterisk 1.2.14?
>
> They work fine with Asterisk; most likely it's your wireless link
> that's the cause of your problem. The jitter buffer will only affect
> received audio, i.e. on your side, and since that is fine, you
> probably don't need to adjust it. Instead try this:
>
> 1) Change packet size in increments of 20 ms (i.e. 0.02, 0.04 or
> perhaps 0.06). Your wireless link may not like too many small packets.
>
> 2) Turn off silence suppression if it's on.
>
> 3) Try a different codec -- g726-32 or even ulaw to see if it makes a
> difference.
>
> See if that helps.
>
> --Luki
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------