[asterisk-users] Issues with a Linksys SPA 2102 and asterisk

[Luki]

> Any gurus out there with experience with the SPA 2102 against asterisk 1.2.14?

They work fine with Asterisk; most likely it's your wireless link
that's the cause of your problem. The jitter buffer will only affect
received audio, i.e. on your side, and since that is fine, you
probably don't need to adjust it. Instead try this:

1) Change packet size in increments of 20 ms (i.e. 0.02, 0.04 or
perhaps 0.06). Your wireless link may not like too many small packets.

2) Turn off silence suppression if it's on.

3) Try a different codec -- g726-32 or even ulaw to see if it makes a
difference.

See if that helps.

--Luki