[asterisk-users] Newbie Question

[Chris Nighswonger]

Thanks for the responses.

iptables on the * box has no rules and all tables default to 'accept.'

I have not got to the point of placing calls out across the internet
yet. The issue here is no audio back from the * box when running
through the demo routine.

I'll try to set it up to make a call outside tomorrow.

Chris

On 3/8/07, Leonardo Kamache (Gmail) <lkamache at gmail.com> wrote:
> Don't forget about 4569 UDP port (IAX protocol) forwarded to your Asterisk box.
>
>
> Best Regards;
>
> Leonardo Kamache
>
>
>
> On 3/8/07, Dovid B <asteriskusers at dovid.net> wrote:
> > If both the asterisk server and the softphone are on the same LAN then I
> > would look at your firewall settings on the box. Make sure you have 5060 and
> > 10,000 - 20,000 UDP open. If the phone is connecting to the server over the
> > internet and the server IS behind NAT then you need to forward ports 5060
> > and 10,000-20,000 UDP to the asterisk server.
> >
> >
> > ----- Original Message -----
> > From: "Chris Nighswonger" <cnighswonger at foundations.edu>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Friday, March 09, 2007 1:16 AM
> > Subject: [asterisk-users] Newbie Question
> >
> >
> > > Hi all,
> > >  I'm new to Astrisk so bear with me.
> > >  I have just installed AsteriskNOW and am quite familiar with RH
> > > Linux. I have configured it and am using Xlite to connect and learn to
> > > move around the conf files. I have a problem, however. The client
> > > connects and dials ok, but there is no audio. In searching the
> > > archives I found discussion of this issue primarily centered on NAT
> > > issues. This is not my issue (I think). Here is some info:
> > >
> > > 1. * server and clients are all on the same subnet but are separated
> > > from the internet by a proxy/firewall which forces all port 80 traffic
> > > through the proxy.
> > > 2. The server has a single channel fxo card.
> > > 3. Snip of sip.conf:
> > >
> > > [test]
> > > type=friend
> > > secret=verysecret
> > > regexten=1234                   ; When they register, create extension
> > > 1234
> > > callerid="Test Unit" <1234>
> > > host=dynamic                    ; This device needs to register
> > > nat=yes                         ; X-Lite is behind a NAT router
> > > canreinvite=no                  ; Typically set to NO if behind NAT
> > > disallow=all
> > > allow=gsm                       ; GSM consumes far less bandwidth than
> > > ulaw
> > > ;allow=ulaw
> > > ;allow=alaw
> > > mailbox=1234 at default            ; Subscribe to status of multiple
> > > mailboxes
> > > context=internal
> > >
> > >
> > > Here is the problem:
> > >
> > > Xlite registers fine. When I dial 500 to access the demo, the *
> > > console shows the client connect and the demo audio plays. However,
> > > there is no sound on the client end. I have installed Xlite on an XP
> > > workstation and on a *nix workstation. Both installs behave the same.
> > >
> > > Any thoughts? Or do I need to post more details?
> > >
> > > Thanks,
> > > Chris
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Chris Nighswonger
Network & Systems Director
Foundations Bible College & Seminary
www.foundations.edu
www.fbcradio.org
cnighswonger at foundations.edu
V:910-892-8761
C:919-820-5473
-------------
NOTICE: The information contained in this electronic mail message is
intended only for the use of the intended recipient, and may also be
protected by the Electronic Communications Privacy Act, 18 USC
Sections 2510-2521. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please reply to the
sender, and delete the original message. Thank you.