[asterisk-users] Newbie Question

[Leonardo Kamache (Gmail)]

Don't forget about 4569 UDP port (IAX protocol) forwarded to your Asterisk box.


Best Regards;

Leonardo Kamache



On 3/8/07, Dovid B <asteriskusers at dovid.net> wrote:
> If both the asterisk server and the softphone are on the same LAN then I
> would look at your firewall settings on the box. Make sure you have 5060 and
> 10,000 - 20,000 UDP open. If the phone is connecting to the server over the
> internet and the server IS behind NAT then you need to forward ports 5060
> and 10,000-20,000 UDP to the asterisk server.
>
>
> ----- Original Message -----
> From: "Chris Nighswonger" <cnighswonger at foundations.edu>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, March 09, 2007 1:16 AM
> Subject: [asterisk-users] Newbie Question
>
>
> > Hi all,
> >  I'm new to Astrisk so bear with me.
> >  I have just installed AsteriskNOW and am quite familiar with RH
> > Linux. I have configured it and am using Xlite to connect and learn to
> > move around the conf files. I have a problem, however. The client
> > connects and dials ok, but there is no audio. In searching the
> > archives I found discussion of this issue primarily centered on NAT
> > issues. This is not my issue (I think). Here is some info:
> >
> > 1. * server and clients are all on the same subnet but are separated
> > from the internet by a proxy/firewall which forces all port 80 traffic
> > through the proxy.
> > 2. The server has a single channel fxo card.
> > 3. Snip of sip.conf:
> >
> > [test]
> > type=friend
> > secret=verysecret
> > regexten=1234                   ; When they register, create extension
> > 1234
> > callerid="Test Unit" <1234>
> > host=dynamic                    ; This device needs to register
> > nat=yes                         ; X-Lite is behind a NAT router
> > canreinvite=no                  ; Typically set to NO if behind NAT
> > disallow=all
> > allow=gsm                       ; GSM consumes far less bandwidth than
> > ulaw
> > ;allow=ulaw
> > ;allow=alaw
> > mailbox=1234 at default            ; Subscribe to status of multiple
> > mailboxes
> > context=internal
> >
> >
> > Here is the problem:
> >
> > Xlite registers fine. When I dial 500 to access the demo, the *
> > console shows the client connect and the demo audio plays. However,
> > there is no sound on the client end. I have installed Xlite on an XP
> > workstation and on a *nix workstation. Both installs behave the same.
> >
> > Any thoughts? Or do I need to post more details?
> >
> > Thanks,
> > Chris
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>