[asterisk-users] Fwd: Back to back E1 - asterisk <=> toshiba pbx -
Call droping
Vidura Senadeera
vidurased at gmail.com
Wed Mar 7 23:01:12 MST 2007
Skipped content of type multipart/alternative-------------- next part --------------
A non-text attachment was scrubbed...
Name: zaptel.conf
Type: application/octet-stream
Size: 766 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070307/72df5acc/zaptel.obj
-------------- next part --------------
CPU0 CPU1
0: 327803993 339534993 IO-APIC-edge timer
8: 0 2 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
14: 491341 509003 IO-APIC-edge ide0
169: 326692201 340097503 IO-APIC-level wcte11xp
193: 467454 449006 IO-APIC-level aacraid
201: 40446355 59 IO-APIC-level eth0
209: 263442740 403340853 IO-APIC-level wcte11xp
217: 404363696 262780720 IO-APIC-level wctdm24xxp
NMI: 0 0
LOC: 667384291 667384290
ERR: 0
MIS: 0
-------------- next part --------------
00:00.0 Host bridge: Intel Corporation E7320 Memory Controller Hub (rev 0c)
Subsystem: Intel Corporation E7320 Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities: [40] Vendor Specific Information
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
Capabilities: [64] Express Root Port (Slot-) IRQ 0
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
Capabilities: [64] Express Root Port (Slot-) IRQ 0
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 48
Bus: primary=00, secondary=03, subordinate=03, sec-latency=48
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8100000-d81fffff
Prefetchable memory behind bridge: 00000000dc000000-00000000dff00000
Capabilities: [50] PCI-X bridge device.
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8200000-d9ffffff
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company: Unknown device 25a1
Flags: bus master, medium devsel, latency 0
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 1400
Memory at 40000000 (32-bit, non-prefetchable)
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 25a1
Flags: medium devsel
I/O ports at 1100
03:01.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec 2120S (Crusader)
Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 9
Memory at dc000000 (32-bit, prefetchable)
Capabilities: [80] Power Management version 2
03:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company: Unknown device 000c
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 9
Memory at 00000000d8100000 (64-bit, non-prefetchable)
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
03:03.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device 79fe:0001
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at 2000
Memory at d8110000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
03:04.0 Ethernet controller: Digium, Inc. Wildcard TDM2400P (rev 11)
Subsystem: Digium, Inc. Wildcard TDM2400P
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at 2400
Memory at d8111000 (32-bit, non-prefetchable)
Capabilities: [c0] Power Management version 2
04:01.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device 79fe:0001
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at 3000
Memory at d8200000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
04:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Flags: bus master, stepping, medium devsel, latency 66, IRQ 10
Memory at d9000000 (32-bit, non-prefetchable)
I/O ports at 3400
Memory at d8201000 (32-bit, non-prefetchable)
Capabilities: [5c] Power Management version 2
-------------- next part --------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
;trunkgroup=>2,16
;spanmap=1,2,1
;trunkgroup=>3,47
;spanmap=2,3,1
[channels]
;==========Suntel E1 PRI configuration ============
signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
switchtype=euroisdn
echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds
resetinterval=never
callerid=asreceived
usecallerid=yes
overlapdial=no
pridialplan=unknown
pritimer => t203,30000
immediate=no
busycount=5
rxgain=3
txgain=0
endcalleridafter=5
rxwink=300
callprogress=yes
busydetect=no
useincomingcalleridonzaptransfer=yes
loadzone=us
context=from-pstn ; Points to the default context of your extensions.conf
group=2
pickupgroup=0,1,2,3
channel=>1-15
channel=>17-31
;channel=>17-19
;===========================================
;PRI/E1 link
;=========== Connection to Legacy PBX =============
signalling=pri_net;pri_cpe = PRI slave ; pri_net = PRI master
switchtype=euroisdn
echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds
rxgain=1
txgain=0
endcalleridafter=5
rxwink=300
resetinterval=never
callerid=asreceived
;amaflags=default
usecallerid=yes ; newly added
callwaiting=no
callprogress=yes
transfer=yes
canpark=yes
cancallforward=yes
busydetect=no
busycount=5
pridialplan=unknown
pritimer => t203,30000
overlapdial=yes
threewaycalling=yes
immediate=no
usecallinpres=yes
callgroup=3
pickupgroup=0,1,2,3
loadzone=us
context=from-internal
group=3
channel=>32-46,48-62
;==========================
language=en
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
usedistinctiveringdetection=yes
busydetect=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
callprogress=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.9
txgain=0.9
group=0
group=1
callgroup=1
pickupgroup=0,1,2,3
immediate=no
;Include genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
More information about the asterisk-users
mailing list