[asterisk-users] capi installation problem

[Giedrius Augys]

 Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want  to install it to my ubuntu box (kernel:
2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds
this card:
*02:0d.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH
Fritz!PCI v2.0 ISDN (rev 02)
        Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI
v2.0 ISDN
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 201
        Region 0: Memory at ff9fec00 (32-bit, non-prefetchable) [size=32]
        Region 1: I/O ports at df80 [size=32]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=55mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-*



  I found tutorial in http://www.asteriskguru.com/tutorials/avm_b1.html .I
have installed these packages:
*ii  capiutils                      3.9.20060704-1          Utilities for
CAPI-capable ISDN cards
ii  libcapi20-3                    3.9.20060704-1          libraries for
CAPI support
ii  libcapi20-dev                  3.9.20060704-1          libraries for
CAPI support
ii  avm-fritz-firmware-2.6.17-10   3.11+2.6.17.7-10.1      Firmware for AVM
Fritz! ISDN hardware*

and downloaded firmaware from *
ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/ .*My capi.conf is:
*b1pci           /usr/share/isdn/b1.t4           DSS1    -       -
-       -       P2P*

Then I exec command capiinit start, I have noting on output, but it load
modules:
*root at asterisk:~# lsmod
Module                  Size  Used by
b1pci                  10624  0
b1dma                  17412  1 b1pci
b1                     25856  2 b1pci,b1dma
capi                   19392  0
kernelcapi             49664  4 b1pci,b1dma,b1,capi
capifs                  7176  2 capi
ipv6                  271136  12
lp                     12964  0
mISDN_l2               44288  0
mISDN_l1               13192  0
avmfritz               25740  0
mISDN_isac             17280  1 avmfritz
mISDN_core             75648  4 mISDN_l2,mISDN_l1,avmfritz,mISDN_isac*

But when I execute command cappinfo, I get :
*root at asterisk:~# capiinfo
capi not installed - No such device or address (6).
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070307/464807ed/attachment.htm