[asterisk-users] Polycom Questions

[Steve Blair]

The dialplan looks OK, depending of course on the numbers you trying to 
dial. If you want the phone to wait for a given timeout period after the 
digits are entered add a "T" immediately after the specific dialplan 
rule. (ie: xx[2-9]xxxxxxT). I'm assuming from your rules you need to 
dial a "9" first. Depending upon your numbering plan you could try ( 
9x.T|0T|9011xxx.T )

-Steve

»Steven Ringwald« wrote:

> Any Polycom gurus out there? If so, I have a few config file questions.
>
> First off, does anyone have the daylight savings time rules written 
> for this Sunday's big change?
>
> Secondly, if there any way in the config file to tell the phone not to 
> display the number of missed calls? I don't mind it keeping the missed 
> calls list, I just don't want that running count.
>
> Lastly, I am trying to get the dialplan to work, but have had no luck 
> so far. I have tried defining it in the sip.cfg and/or the phone1.cfg, 
> but have had no luck getting the phone to latch onto the numbers, and 
> immediately dial. I am running with the 2.0.1 firmware, if that matters.
>
> from sip.cfg:
>
>   <dialplan dialplan.impossibleMatchHandling="0" 
> dialplan.removeEndOfDial="1">
>      <digitmap 
> dialplan.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" 
> dialplan.digitmap.timeOut="3"/>
>      <routing>
>         <server dialplan.routing.server.1.address="10.0.17.8" 
> dialplan.routing.server.1.port="5060"/>
>         <emergency dialplan.routing.emergency.1.value="911" 
> dialplan.routing.emergency.1.server.1="1"/>
>      </routing>
>   </dialplan>
>
> from phone1.cfg:
>
> <dialplan dialplan.1.impossibleMatchHandling="0" 
> dialplan.1.removeEndOfDial="1" dialplan.2.impossibleMatchHandling="0" 
> dialplan.2.removeEndOfDial="1" dialplan.3.impossibleMatchHandling="0" 
> dialplan.3.removeEndOfDial="1" dialplan.4.impossibleMatchHandling="0" 
> dialplan.4.removeEndOfDial="1" dialplan.5.impossibleMatchHandling="0" 
> dialplan.5.removeEndOfDial="1" dialplan.6.impossibleMatchHandling="0" 
> dialplan.6.removeEndOfDial="1">
>      <digitmap 
> dialplan.1.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" 
> dialplan.1.digitmap.timeOut="3" dialplan.2.digitmap="" 
> dialplan.2.digitmap.timeOut="" dialplan.3.digitmap="" 
> dialplan.3.digitmap.timeOut="" dialplan.4.digitmap="" 
> dialplan.4.digitmap.timeOut="" dialplan.5.digitmap="" 
> dialplan.5.digitmap.timeOut="" dialplan.6.digitmap="" 
> dialplan.6.digitmap.timeOut=""/>
>      <routing>
>         <server dialplan.1.routing.server.1.address="10.0.17.8" 
> dialplan.1.routing.server.1.port="5060" 
> dialplan.2.routing.server.1.address="" 
> dialplan.2.routing.server.1.port="" 
> dialplan.3.routing.server.1.address="" 
> dialplan.3.routing.server.1.port="" 
> dialplan.4.routing.server.1.address="" 
> dialplan.4.routing.server.1.port="" 
> dialplan.5.routing.server.1.address="" 
> dialplan.5.routing.server.1.port="" 
> dialplan.6.routing.server.1.address="" 
> dialplan.6.routing.server.1.port=""/>
>         <emergency dialplan.1.routing.emergency.1.value="" 
> dialplan.1.routing.emergency.1.server.1="" 
> dialplan.2.routing.emergency.1.value="" 
> dialplan.2.routing.emergency.1.server.1="" 
> dialplan.3.routing.emergency.1.value="" 
> dialplan.3.routing.emergency.1.server.1="" 
> dialplan.4.routing.emergency.1.value="" 
> dialplan.4.routing.emergency.1.server.1="" 
> dialplan.5.routing.emergency.1.value="" 
> dialplan.5.routing.emergency.1.server.1="" 
> dialplan.6.routing.emergency.1.value="" 
> dialplan.6.routing.emergency.1.server.1=""/>
>      </routing>
>   </dialplan>
>
>
>
> Thanks in advance!
> Steve
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>