[asterisk-users] Polycom Questions

[»Steven Ringwald«]

Any Polycom gurus out there? If so, I have a few config file questions.

First off, does anyone have the daylight savings time rules written for 
this Sunday's big change?

Secondly, if there any way in the config file to tell the phone not to 
display the number of missed calls? I don't mind it keeping the missed 
calls list, I just don't want that running count.

Lastly, I am trying to get the dialplan to work, but have had no luck so 
far. I have tried defining it in the sip.cfg and/or the phone1.cfg, but 
have had no luck getting the phone to latch onto the numbers, and 
immediately dial. I am running with the 2.0.1 firmware, if that matters.

from sip.cfg:

   <dialplan dialplan.impossibleMatchHandling="0" 
dialplan.removeEndOfDial="1">
      <digitmap 
dialplan.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" 
dialplan.digitmap.timeOut="3"/>
      <routing>
         <server dialplan.routing.server.1.address="10.0.17.8" 
dialplan.routing.server.1.port="5060"/>
         <emergency dialplan.routing.emergency.1.value="911" 
dialplan.routing.emergency.1.server.1="1"/>
      </routing>
   </dialplan>

from phone1.cfg:

<dialplan dialplan.1.impossibleMatchHandling="0" 
dialplan.1.removeEndOfDial="1" dialplan.2.impossibleMatchHandling="0" 
dialplan.2.removeEndOfDial="1" dialplan.3.impossibleMatchHandling="0" 
dialplan.3.removeEndOfDial="1" dialplan.4.impossibleMatchHandling="0" 
dialplan.4.removeEndOfDial="1" dialplan.5.impossibleMatchHandling="0" 
dialplan.5.removeEndOfDial="1" dialplan.6.impossibleMatchHandling="0" 
dialplan.6.removeEndOfDial="1">
      <digitmap 
dialplan.1.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" 
dialplan.1.digitmap.timeOut="3" dialplan.2.digitmap="" 
dialplan.2.digitmap.timeOut="" dialplan.3.digitmap="" 
dialplan.3.digitmap.timeOut="" dialplan.4.digitmap="" 
dialplan.4.digitmap.timeOut="" dialplan.5.digitmap="" 
dialplan.5.digitmap.timeOut="" dialplan.6.digitmap="" 
dialplan.6.digitmap.timeOut=""/>
      <routing>
         <server dialplan.1.routing.server.1.address="10.0.17.8" 
dialplan.1.routing.server.1.port="5060" 
dialplan.2.routing.server.1.address="" 
dialplan.2.routing.server.1.port="" 
dialplan.3.routing.server.1.address="" 
dialplan.3.routing.server.1.port="" 
dialplan.4.routing.server.1.address="" 
dialplan.4.routing.server.1.port="" 
dialplan.5.routing.server.1.address="" 
dialplan.5.routing.server.1.port="" 
dialplan.6.routing.server.1.address="" dialplan.6.routing.server.1.port=""/>
         <emergency dialplan.1.routing.emergency.1.value="" 
dialplan.1.routing.emergency.1.server.1="" 
dialplan.2.routing.emergency.1.value="" 
dialplan.2.routing.emergency.1.server.1="" 
dialplan.3.routing.emergency.1.value="" 
dialplan.3.routing.emergency.1.server.1="" 
dialplan.4.routing.emergency.1.value="" 
dialplan.4.routing.emergency.1.server.1="" 
dialplan.5.routing.emergency.1.value="" 
dialplan.5.routing.emergency.1.server.1="" 
dialplan.6.routing.emergency.1.value="" 
dialplan.6.routing.emergency.1.server.1=""/>
      </routing>
   </dialplan>



Thanks in advance!
Steve